Tight line-load regulation ensures that the output voltage holds steady from no load to full load. This means substantially longer life and safer operation. Lower operating temperature half that of some switch mode electronic models, even in its subcompact size. When not in use it is essentially off, reducing electricity usage. criteria, minimizing radio and television equipment interference especially on the lower frequency bands Can be used with or without a battery When used as a converter/power supply, the IOTA power converter will only supply what is required by the load. Protection against low and transient AC line voltage as well as spikes coming from the AC power source or from improperly adjusted generators, a major cause of converter/power supply failure. The battery charger then maintains the batteries, only putting into the battery what is required by load or self-discharge, cutting back to milliamps as the battery requires. Quickly and efficiently charges batteries from the full rated output of the IOTA battery charger. This means longer life for any connected load virtually no AC ripple to cause static or premature failure of radio or television equipment. Exceptionally clean DC output insures pumps, motors, fans, and lights work perfectly. Batteries are charged quickly and efficiently without over-charging and pumps, motors, and fans operate perfectly for prolonged life. Extra care has been given to insure many years of service-free operation, even when subjected to extremely harsh conditions. Using state-of-the-art, switch-mode technology, IOTA Power Converter/Battery Chargers are engineered with the user and variable environmental conditions in mind. The DLS-30 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging. Current limit and thermal/overload protection.Designed to withstand low transient AC line voltage.Quickly and efficiently charges batteries.The DLS-30 uses the NEMA 5-15 plug for 15A receptacle (see image provided). The DLS-30 plug type on the AC cord is determined by the input voltage and ratings of this DLS model and/or UL specifications. Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells. This helps to ensure the longest possible life of the battery. The voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. As a battery charger (you need to purchase the external IQ4 controller or the DLS-30-IQ4 to have this function), the DLS-30 will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. As a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal DC load up to the converter’s rated output current. This unit will draw 6.5AC amps or about 780VA. The DLS-30 battery power converter from IOTA Engineering converts nominal 120V AC voltage to 13.4V DC. External reverse polarity fuse protection from incorrect battery connection. criteria, minimizing radio and television equipment interference, especially on the lower frequency bands. The DLS series converter/power supply meets F.C.C.Clean and steady DC Output operates your loads the way they were intended, avoiding potential damage to systems from errant DC voltage.Can add a IOTA IQ Smart Charge Controler for automatic four-stage charging. Proportional fan control for whisper-quiet operation.Reverse Polarity Protection to protect against damage from incorrect battery hook-up, using readily available fuse types that are easy to replace.Built-in protection features guard the unit against erratic line voltage that can occur from shore power or generator supplies.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |